Hawking HW17ACM User Manual page 61

RADIUS Type
RADIUS Server
Authentication Port
Shared Secret
Session Timeout
Accounting
Accounting Port
56
Select "Internal" to use the access point's built-in RADIUS
server or "external" to use an external RADIUS server.
Enter the RADIUS server host IP address.
Set the UDP port used in the authentication protocol of the
RADIUS server. Value must be between 1 – 65535.
Enter a shared secret/password between 1 – 99 characters in
length. This should match the "MAC-RADIUS" password used
in 4-3-1-3-6 or 4-3-2-3.
Set a duration of session timeout in seconds between 0 –
86400.
Enable or disable RADIUS accounting.
When accounting is enabled (above), set the UDP port used in
the accounting protocol of the RADIUS server. Value must be
between 1 – 65535.