Table of Contents
Advertisement
JDVD1500
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Press and hold a preset button (9-14) for three
seconds. The preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (9-14) to select the corresponding stored station.
Automatically Store / Preset Scan
Automatically Store
Select a band (if needed). Press AS/PS (15) for more than three seconds to automatically select six
strong stations and store them in the current band. The new stations replace any stations already
stored in that band.
Preset Scan
Select a band (if needed). Press AS/PS (15) to scan stations stored in the current band. The unit
will pause for ten seconds at each preset station. Press AS/PS again to stop scanning when the
desired station is reached.
Stereo
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the "ST"
icon appears in the display. When no stereo signal is available, the unit will automatically revert to
mono operation, and no icon will be displayed.
13
Advertisement
Table of Contents
