Table of Contents
Advertisement
JDVD1500
Power On/Off (
)
Press the
button (1) on the front of the unit ON or OFF.
Volume Control
To increase the volume, rotate the audio control knob (3) clockwise.
To decrease the volume, rotate the audio control knob counter clockwise. When the volume is
adjusted, the volume level is shown on the display panel as a number ranging from "0" (lowest) to
"40" (highest).
Mute
Press the MUTE button (6) to mute the audio output. "MUTE" will appear on the display. Press
MUTE again to restore the audio output to the previous level.
Mode
Press the MODE button (16) to select a different mode of operation, as indicated on the display
panel. Available modes include Tuner, DVD, AUX IN and BT.
Equalizer (EQ) And Loudness(LOUD)
The preset equalizer applies preset sound effects to the unit's audio output signal. To adjust the
preset equalizer, press the EQ/LD button (17). Press repeatedly to choose between the following
modes: FLAT, POP, CLAS, ROCK.
When listening to music at low volume levels, this feature will boost the bass and treble ranges to
compensate for the characteristics of human hearing. Press and hold the EQ/LD button (17) to
activate this feature. "LOUD ON" appears on the display panel. Press and hold the EQ/LD
button(17) again to turn the LOUD function off.
Display Selector (DISP)
This unit can display either the clock time or radio frequency/CD player functions. Press the DISP
button (8) to display the time. The correct time of day can be set by pressing and holding the DISP
button.
Setting the Clock (DISP)
To set the clock, perform the following steps:
1.
Press the DISP button (8) to display the clock.
2.
Press and hold the DISP button (8) until the time display flashes.
3.
Within 5 seconds, turn the audio control knob (6) to adjust the hour to the desired setting.
4.
Press and hold the DISP button (8) to move to the minutes field.
5.
Turn the audio control knob to adjust the minutes to the desired setting.
6.
Press the DISP button again to return to radio frequency or disc play and normal operation will
resume automatically.
Auxiliary Input Operation
You can connect another audio system to the unit through the AUX IN terminals on the back (AUX
IN) of the unit. Once the device is connected, press the MODE button (16) on the front panel or the
SOURCE button on the remote control to select "AUX " mode.
PA
PA function is available if user already install the microphone.
Reset
Use a pencil or any non-metallic object to press and hold the RESET button(21) for five seconds to
reset the main unit. The unit will return to the factory default settings.
AUDIO MENU
Press the volume control button (3) to access the Audio Menu. You can navigate through the Audio
Menu items by pressing the volume control button repeatedly. Once the desired menu item appears
on the display, adjust that option by turning the audio control knob within 10 seconds. The unit will
automatically exit the Audio Menu after six seconds of inactivity. The following menu items can be
adjusted.
Bass Level (BAL)
Use the Volume Control knob(4) to adjust the Bass level range from "-7" to "+7".
Treble Level (TRE)
Use the Volume Control knob(4) to adjust the Treble level range from "-7" to "+7".
Balance (BAL)
Use the Volume Control knob(4) to adjust the Balance between the right and left speakers from
"R 7" (full right) to "L 7" (full left). "0" represents an equal balance between the right and left
speakers.
11
Advertisement
Table of Contents
