Datavideo SE-200 Pro Instruction Manual page 7

3. Keypad
for the SE-200's Titler functions.
4. Keypad
for the SE-200's Editor functions.
5. MODE key:
Selects the function mode (Titler, S.E.G., or Editor).
6 AUDIO FADE Key:
.
fade is active.
7 VIDEO FADE Key:
.
fade is active.
8. MIX Key:
Activates T-Bar for manual A/B dissolves. When LED is lit, mixing is active.
Note: if you have two non-synchronous video sources (as you almost certainly are),
this LED must be OFF.
9 T-Bar Control:
.
audio/video fades, T-bar's "up" position means "IN" and the "down" means "OUT".
For A/B dissolves (synchronous source ONLY), when the source A is selected
(source "A"" LED is lit), the T-Bar's "UP" position means "Source A" and the "down"
position means "Source B".
10. Source Key:
manually with non-synchronous sources, use the T-Bar to fade the first source OUT,
then press the SOURCE key to switch sources, then use the T-Bar again to fade
the second source IN.)
11. B/W key
: Creates a black and white effect for source video. This key cycles
through four choices:
* Source A only
at all).
12. Color Processor Key
GAIN and COLOR controls. When LED is lit, color processing is active. SE-200 will
memorize the status ("ON" or "OFF") of processor.
13. R-G-B Corrector Key
joystick is active. Note: color processing must be active first, before R-G-B
correction can be activated.
14. R-G-B Joystick
(Active only when both R-G-B CORRECTION and COLOR PROCESSOR LEDs are lit).
15. VIDEO GAIN Control
when COLOR PROCESSOR LED is lit).
16. VIDEO COLOR Control
when COLOR PROCESSOR LED is lit).
17. AUDIO SOURCE A Control:
18. AUDIO SOURCE B Control:
19. AUDIO MUSIC Control:
source (such as CD player)
20. AUDIO LEVEL Indicator:
output mix.
21. Power on/off Switch:
is properly connected.
Activates T-Bar for manual audio fades. When LED is lit, audio
Activates T-Bar for manual video fades. When LED is lit, video
Lets you manually control audio/video fades and A/B dissolves. For
Cuts back and forth between A and B sources. (Note: to fade
* Source B only * Both Sources A + B * Bypass (no B/W effect
: Enables R-G-B CORRECTOR Key, and activates VIDEO
: Actives joystick for R-G-B color correction. When LED is lit,
: Controls R-G-B color correction/white balance of video output.
: Adjusts the luminance level of video output (active only
: Adjusts color saturation of video output (active only
Adjusts the audio volume of Source A.
Adjusts the audio volume of Source B.
Adjusts the audio volume of any background music
LED display indicates the volume of complete audio
Turns power on and off when power supply (AC Adaptor)
3