Related Manuals for Datavideo TB-5
Summary of Contents for Datavideo TB-5
-
Page 2: Warranty
Card and third party provided PC components are covered for 1 year. The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. - Page 3 Disposal For EU Customers only - WEEE Marking This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
- Page 4 Introduction The TB-5 Tally Box is an accessory for the SE-500 Vision Mixer; or SE- 800 Vision Mixer, together with the RMC-90 Remote Control Panel. The TB-5 reads the 15 Pin Tally output from the SE-500 / RMC-90 and provides two colour LED tally lights for each of the four input channels.
- Page 5 Note: If you are using the SE-800 / RMC-90 the Tally LED outputs 1, 2, 3, & 4 equate to the SE-800 input channels A, B, C, & D. For longer cable runs the optional Datavideo CB-1 50m Extension Cable is available. The CB-1 is a 50metre Male to Female 3.5mm Jack Cable.
- Page 6 Tally RED (+12V) Ring Tally GREEN (+12V) Sleeve TB-5 Tally Cable Pin Definition...
- Page 7 Connection Diagram with SE-500...
- Page 8 Connection Diagram with SE-800 / RMC-90...
-
Page 9: Specifications
Specifications Power Requirements: 12V DC 500mA Input: 15Pin Tally Feed from SE-500 / RMC-90 Output: 4 x 3.5mm Jack Sockets to TD-1 Tally Light Size in mm: 76 x 62 x 24 (L x W x H) Weight in grams: 158g... - Page 10 Dec-19.2018 Ver.: E4...