Panasonic U-36PE1U6 Technical Data & Service Manual page 105

SUPPLEMENT ON DRAIN PIPING
Checkpoint after installation
After installation of indoor and outdoor units, panels and electrical wiring, check the following items.
C
Make sure whether indoor and outdoor units are
1
correctly installed.
2 Make sure whether gas leakage is tested.
Make sure whether insulation is completed.
3
(Refrigerant piping and drain piping)
4 Make sure whether drain water is running smoothly.
Make sure whether the power voltage matches the
5
nameplate.
Make sure whether there is miswiring or incorrect
6
connection.
Make sure whether the ground construction is
7
completed.
Make sure whether the wire gauge is followed by the
8
recommended specifications.
Make sure whether the air intake and air outlet of the
9
indoor and outdoor units are sealed by obstacles.
h e c k p i o t n S y m p o t m
Fall, vibration, noise
No cooling, no heating
Water leakage
Water leakage
Inoperative, burnout
Inoperative, burnout
Ground leakage
Inoperative, burnout
No cooling, no heating
1-99
1. Specifications
C h e c k R e m a k r
1