Menu Function; Self Clean Operation - Mitsubishi Heavy Industries SRF35ZS-W User Manual

MENU function

■ MENU function is used for setting SELF CLEAN operation and PRESET operation.

SELF CLEAN operation

■ SELF CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moisture from inside of the indoor unit and
control the growth of mold and bacteria.
1
Every time the MENU switch is pressed with the tip of a
ballpoint pen, etc., the display is switched in order of:
SELF CLEAN
operation
1
Select the SELF CLEAN operation by pressing the
MENU switch.
2
Select SELF CLEAN on by pressing " or
button.
(SELF CLEAN off)
3
Press the SET button.
NOTE
Two hours later, the air-conditioner stops SELF CLEAN operation
automatically. To stop the air-conditioner immediately, press the ON/OFF
button.
SELF CLEAN operation is not operated after HEAT, FAN, OFF-TIMER
and SLEEP operations have nished.
The indoor unit fan runs for about two hours in SELF CLEAN operation.
The RUN light illuminates during SELF CLEAN operation.
Pressing the SLEEP button or NIGHT SETBACK button during SELF
CLEAN operation cancels the SELF CLEAN operation and then the unit
is set to SLEEP or NIGHT SETBACK operation.
This is not a function for removing mold, germs or grime that have
already adhered to the unit.
EN-25
PRESET operation
(SELF CLEAN on)
3 seconds
ON
OFF
1 second
(TIMER)"