Air Ow Direction Adjustment - Mitsubishi Heavy Industries SRF35ZS-W User Manual

Air ow direction adjustment

■ Up/down direction can be adjusted with the AIRFLOW U/D (UP/DOWN) button on the remote control. Every time you press this
button the mode changes as follows:
Change on AIRFLOW (UP/DOWN) mode.
NOTE
•
The actual position of the ap may differ from the display shown.
NOTE FOR HEATING OPERATION
• When operation starts, the ap direction is xed at the horizontal position in order to avoid cold draft, and return to the set the posi-
tion that was set after the warm air supply is starting.
• The ap direction will be controlled to the horizontal position when the room temperature reaches the set temperature and com-
pressor stops or when defrosting is in operation.
• The air ow direction cannot be set during the period mentioned above. Change the air ow direction settings after the warm air is
supplied and the ap goes to the set position.
MEMORY FLAP (FLAP STOPPED)
When you press the AIRFLOW button once while the ap is operating, it stops swinging at the position. Since this angle is memori-
zed in the microcomputer, the ap will automatically be set at this angle when the next operation is started.
• Do not expose directly to air ow from the air-conditioner for a long time.
• When in COOL or DRY operation, do not operate for a long period with the
air ow blowing straight down. Otherwise, condensation may appear on the
outlet grill and drip down.
• Do not try to adjust the aps by hand, as the control angle may change or
the ap may not be closed completely.
Adjusting left/right air ow direction
Adjust the direction by moving the left/right air ow n by hand.
• When adjusting the air ow direction, be careful with the
fans rotating in the air-conditioner.
Otherwise you may injure your ngers.
• The lower ap is not adjustable while the air-conditioner is
OFF.
Adjusting air ow direction
(Flap stopped)
WARNING
CAUTION
CAUTION
• Recommended angle of the flap when
stopping
COOL, DRY
EN-15
(Swing)
(Horizontal
HEAT
blowing)
(Slant forward
blowing)