MENU function
■ MENU function is used for setting the Display brightness adjustment, SELF CLEAN operation, Fan control in heating thermo - OFF,
PRESET operation, Wireless LAN connection setting, and Wireless LAN communication setting.
Wireless LAN connection setting
■ For Wireless LAN connection setting, refer to another user's manual.
NOTICE
If the communication status is poor due to radio wave interference by an obstacle, microwave oven and so on, the operation contents
may not be reflected. Check the operational status periodically.
The operation contents of your smartphone are not reflected to the remote control display. The contents set by the remote control
are reflected to the application (Smart M-Air).
Display brightness adjustment
■ This function can be used when it is necessary to adjust the brightness of unit display.
1
Every time the MENU switch is pressed with the tip of
a ballpoint pen, etc., the display is switched in order of:
Display brightness
adjustment
Wireless LAN
communication setting
1
Select the Display brightness adjustment by pressing
the MENU switch.
2
Select the brightness level by pressing " or (TIMER)"
button.
100 %
(Default)
3
Press the SET button.
EN-27
SELF CLEAN
Fan control in heating
operation
thermo - OFF
Wireless LAN
PRESET operation
connection setting
50 %
0 %
(Turned off)