MENU function
■ MENU function is used for setting the Display brightness adjustment, AUTO OFF operation, SELF CLEAN operation, Fan control in
heating thermo - OFF, PRESET operation, Wireless LAN connection setting, and Wireless LAN communication setting.
Wireless LAN connection setting
■ For Wireless LAN connection setting, refer to another user's manual.
NOTE
• If the communication status is poor due to radio wave interference by an obstacle, microwave oven and so on, the operation contents
may not be reflected. Check the operational status periodically.
• The operation contents of your smartphone are not reflected to the remote control display. The contents set by the remote control
are reflected to the application (Smart M-Air).
Display brightness adjustment
■ This function can be used when it is necessary to adjust the brightness of unit display.
1
Every time the MENU switch is pressed with the tip of
a ballpoint pen, etc., the display is switched in order of:
Display brightness
adjustment
Wireless LAN
communication setting
1
Select the Display brightness adjustment by pressing
the MENU switch.
2
Select the brightness level by pressing " or
button.
100 %
(Orignal)
3
Press the SET button.
EN-28
AUTO OFF
SELF CLEAN
operation
operation
Wireless LAN
PRESET operation
connection setting
50 %
(Turned off)
Fan control in heating
thermo - OFF
(TIMER)"
0 %