Table of Contents
Advertisement
[FIXED]
*2
*1 [FAST] cannot be set when input signal is not interlaced signal.
*2 Only when moving image signal or still image signal with the vertical scanning frequency of 50 Hz or 60 Hz is input
Note
f When [FAST] is set, the picture quality deteriorates. The [ADVANCED MENU] menu → [DIGITAL CINEMA REALITY] cannot be set.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
1)
Press as to select [RASTER POSITION].
2)
Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3)
Press asqw to adjust the position.
Chapter 4 Settings — [ADVANCED MENU] menu
Sets image frame delay to be constant regardless of the image position or magnification.
ENGLISH - 101
Advertisement
Table of Contents
