Table of Contents
Advertisement
[LENS]
Perform the setting and operation regarding the projection lens.
[LENS TYPE]
When the projector is used for the first time or when the projection lens is replaced, confirm the [LENS TYPE]
setting. Change the setting if the type does not match the projection lens attached to the projector.
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS TYPE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[ET-DLE035]
Note
f The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly.
[LENS HOME POSITION]
Operate in following procedure to move the projection lens to the home position.
1)
Press as to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS HOME POSITION].
4)
Press the <ENTER> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly. Change the setting if the type does
not match the projection lens attached to the projector.
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. Refer to "Lens shift range" (x page 71) for details.
f The home position of the Fixed-focus Lens (Model No.: ET-DLE035) may deviate from the designed position.
f [LENS HOME POSITION] can also be executed by pressing the <DEFAULT> button on the remote control while the lens shift adjustment
screen is displayed.
[LENS CALIBRATION]
Detect the lens shift adjustment limit value, and perform the calibration in the adjustment range.
1)
Press qw to select [LENS].
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS CALIBRATION].
4)
Press the <ENTER> button.
f The confirmation screen is displayed.
124 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Select this item when a projection lens anything other than the Fixed-focus Lens (Model No.:
ET-DLE035) is used for projection.
Select this item when the Fixed-focus Lens (Model No.: ET-DLE035) is used for projection.
Advertisement
Table of Contents
