Setting The Language; Setting Tone / Pulse Dialing Mode - ClearSounds Talk500 User Manual

3. Select the current hour using the
button. The minutes will now flash in the display.
4. Select the required minutes using the
DIAL button. The display now shows ENTER DATE and the month
digit is flashing.
5. Select the current month using the
button. The day will now flash in the display.
6. Select the current day using the
7. Exit the set-up mode using the
1. press and release the MENU button until LANGUAGE is shown.
2. press the DIAL button.
3. Select the current language (ENGLISH, ITALIANo, FRANCAIS and
ESpANoL) using the
4. press button to exit the set-up mode.
Setting The Voice prompt YES/No
The telephone is factory preset with all voice features oN. The
volume of the voice features is regulated through the VoLUME HI/
Lo slide switch.
If the user does not wish to hear the voice prompts, they can turn
off the voice feature.
1. press and release the MENU button until VoICE is shown.
2. press the DIAL button.
3. Using the
with DIAL button.
4. press button to exit the set-up mode.

Setting Tone / pulse Dialing Mode

You can select the required dialing type ToNE/pULSE.
1. press and release the MENU button until ToNE/pULSE is shown.
2. press the DIAL button.
3. Select the required dialing type using the
DIAL button.
4. press button to exit the set-up mode.

Setting The Language

or
or to select between VoICE oN or oFF and confirm
or
or
or and confirm with DIAL button.
button.
and confirm with DIAL button.
7 – ENGLISH
and confirm with DIAL
or and confirm with
and confirm with DIAL
or and confirm with