Industry Canada Cs03 Statement - ClearSounds Talk500 User Manual

Talking telephone featuring ultraclear sound shaping technology
Hide thumbs Also See for Talk500:
Table of Contents

Advertisement

Available languages

Available languages

Caller ID information does not show
1. Make sure you are subscribed to Caller ID through your local
phone company.
No Caller ID information while on a call
1. Make sure your service provides Caller ID Information while you are
on a call. This is sometimes known as "Caller ID on Call Waiting" or
"Type II Caller ID".
2. The phone cannot display the information if another phone on the
same line is in use. Make sure all extensions are on hook.
Cannot dial out of Caller ID
1. Make sure your area code is set up properly

INDUSTRY CANADA CS03 STATEMENT

This product meets the applicable Industry Canada technical specifications.
This is confirmed by the registration number. The abbreviation, IC before
the registration number signifies that registration was performed based
on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved
the equipment.
Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connections. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user of this equipment, or equipment malfunctions, may give
the telecommunications company cause to request the user to disconnect
the equipment.
WARNING! Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or an
electrician, as appropriate.
CAUTION: The Ringer Equivalence Number (REN) assigned to each terminal
device provides an indication of the maximum number of terminals allowed
to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5. An alternative indication of
18 – ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

V508

Table of Contents