Table of Contents
Advertisement
CDD
USER GUIDE
CEILING MOUNTING – PROCEDURE
CDD5 only
The optional CDDCB5(B or W*) ceiling bracket may be used in conjunction with the wall brackets
supplied with the CDD5 speakers to mount the CDD5s on a ceiling.
* B and W suffixes denote colour
First fix:
As with wall mounting, first decide whether adjustment is needed in one or both planes, and
then disassemble the wall bracket. In most cases vertical adjustment only will be needed, as
horizontal adjustment will be obtained by mounting the ceiling bracket at the correct angle.
For vertical adjustment only, remove the link section of the wall bracket. If both horizontal
and vertical adjustment is required, separate the wall section of the bracket using a 4 mm hex
key. The wall section is easily identified as it has the larger flange with fixing holes on 45 mm
centres; the cabinet section is smaller and has countersunk holes on 35 mm centres.
Now bolt the wall section of the bracket to the ceiling bracket using the four M5 screws, plain
washers and Nyloc nuts supplied with the ceiling bracket. (Note that although the ceiling bracket
is available in black or white and you would usually select the colour to match the cabinet, we
have used a black bracket with a white CDD5 for better contrast in our photographs.)
CDD User Guide V1.1
28
Advertisement
Table of Contents
