Table of Contents
Advertisement
CDD
USER GUIDE
CDD6, CDD8, CDD10 and CDD12
The CDDWB6/8(B or W*) is a two-part wall bracket comprising a wall mounted spigot and a
cabinet bracket holding a collar which secures onto the spigot. The same bracket fits both
the CDD6 and CDD8 cabinets. The CDDWB10/12(B or W*) wall bracket for the CDD10 and
CDD12 is of very similar design, but is a larger bracket to cater for the greater weight. The fitting
procedure is exactly the same.
* B and W suffixes denote colour
First fix:
The two sections of the bracket should be separated as shown below.
The wall section of the bracket may be attached at first fix stage prior to bringing the speakers to
site. It is also good practice to terminate the speaker cables with the Phoenix connectors at this
stage. Fixings appropriate for the wall surface and weight of the cabinet must be used to ensure
a safe and secure installation; this is particularly important for the larger cabinets as the CDD
12 (for example) weighs 19.3 kg. It is vital to use fixings that are rated to support the weight of
the cabinet being installed.
CDD User Guide V1.1
24
Advertisement
Table of Contents
