Canon PIXMA mini260 Photo Printing Manual page 59

Cause
The device may be
incompatible.
Remove the device and check
the manual supplied with the
connected device.
Error code
The card is currently write-
enabled.
Set to read-only mode before
performing operation.
No battery. Turn printer off and
use the AC adapter or install a
charged battery.
Disconnect the cable connecting the printer and the device, and
then reconnect it.
Depending on the model or brand of your device, you may have
to select a PictBridge-compliant print mode on the device before
connecting it to the printer. You may also have to turn on the
camera or select Play mode manually after connecting the
device to the printer. Disconnect the cable connection, dismiss
the error message on the printer, and perform necessary
operations according your device's instruction manual before
reconnecting it to the printer.
If the error is still not resolved, there is a possibility that you are
using a digital camera or digital video camcorder that is not
supported by this printer. Use a digital camera or digital video
camcorder compatible with this printer.
An error requiring servicing may have occurred. Turn off the
printer, and unplug the power cord of the printer from the power
supply. If you are attaching the optional battery, remove it once.
After a while, plug the power cord of the printer back in, and then
turn on the printer. If the same error occurs, contact a Canon
service representative.
The Card Slot is set to Read/write mode.
You cannot print in this mode. After writing on the memory card,
set to Read-only mode again.
The optional battery is running low.
(1) Turn off the printer.
(2) Connect the supplied AC adapter or attach the charged
battery, then turn on the printer. For details on how to charge
the battery, refer to the manual supplied with the battery.
Action
Troubleshooting 57