Canon PIXMA mini260 Photo Printing Manual page 31

3
Trim the sections you want to print.
buttons: you can move the trimming area.
Easy-Scroll Wheel: you can enlarge or reduce the trimming frame. Turn clockwise to
enlarge or counterclockwise to reduce the cropping frame size.
Function button (f2/Rotate frame): you can rotate the trimming frame. To switch the
cropping frame between portrait and landscape orientations, press this button.
4
Finalize the trimmed area.
(1) Press the OK button.
The trimming area is fixed and the original photo is displayed.
Note
You cannot save the trimmed image to a memory card.
Trimming limits are displayed on photographs that have been trimmed.
To change the cropped area once it has been set, press the Function button (f2/Edit/menu)
again on Edit/menu displayed screen, select Trimming, then press the OK button.
To cancel cropping after cropping has been set, press the Function button (f2/Edit/menu) again
on Edit/menu displayed screen, select Cancel Trimming, then press the OK button. Select
Displayed images only or All images, then press the OK button.
Changing Print Settings—Advanced
You can change the Bordered/Borderless, Brightness, or Contrast by pressing the Function
button (f1/Advanced) on the screen displaying Advanced.
Border
Bordered ................ Prints with a border.
Borderless ............. Prints on the whole paper without a border.
Date
Date ON.................. Prints the date the photo was taken.
Date OFF ................ Does not print the date the photo was taken.
File no.
File no. ON ............. Prints the image No. (DCF No.) on the photo.
File no. OFF ........... Does not print the image No. (DCF No.) on the photo.
Note
It is possible to print both the shooting date and the file no. under the following conditions:
– Layout print is selected, and/or
– Credit card is selected in Page size.
Under these conditions, even if both Date ON and File no. ON are set, only the shooting date will
be printed. If you want to print the file no., select Date OFF.
Red eye correc. ON/Red eye correc. OFF
If you select Red eye correc. ON, the Red eye correction function corrects red-eye caused
by reflection when the flash hits a person's eyes.
Vivid photo ON/Vivid photo OFF
If you select Vivid photo ON, Vivid photo function (Greens and blue are printed more
brightly) is used.
Printing from the Memory Card 29