Epson EB-U42 User Manual page 85

Wireless Network Projection
b
Make sure the wireless LAN module is installed or built into your
projector.
c
Turn on the projector.
d
Press the [LAN] button on the remote control.
The LAN standby screen is displayed. Verify that an SSID and IP
address are displayed.
e
Do one of the following to connect the USB key.
• Connect the USB key to the projector's USB-A port
(EB‑U42/EB‑W42).
• Remove the wireless LAN module from the projector and insert the
USB key into the same port used for the wireless LAN module
(EB‑W41/EB‑X41/EB‑S41/EB‑U05/EB‑W05/EB‑X05/EB‑S05/EB‑U14
0/EB‑W140/EB‑X140/EB‑S140/EB‑X450/EB‑X400/EB‑S400).
You see a projected message that the network information update is
complete.
f
Remove the USB key.
If your projector needs the wireless LAN module, reinsert the wireless
LAN module into the projector.
g
Connect the USB key to a USB port on your computer.
In Windows Vista, if the AutoPlay window is displayed, select
a
MPPLaunch.exe, then select Allow.
h
Follow the on-screen instructions to install the necessary application.
• If the Windows Firewall message is displayed, click Yes to
a
disable the firewall.
• You need administrator authority to install the software.
• If it is not installed automatically, double-click
MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the projector.
i
When you have finished projecting wirelessly, select the Safely Remove
Hardware option in the Windows taskbar, and then remove the USB
key from your computer.
You may need to restart your computer to reactivate your
a
wireless LAN connection.
85