Panasonic AW-UE70WP Operating Instructions Manual page 86

Web screen configurations
„ System settings tab [System]
„
This is the menu in which the camera's output image settings
are configured.
z Genlock
„
This item's setting is reflected immediately.
Horizontal Phase
This is used to adjust the horizontal phase during genlock.
Setting range: –206 to +49
Factory settings: 0
86
(continued)
z Output
„
This item's setting is reflected when the [Set] button is
pressed.
Frequency
This item is selected to switch the frame frequency.
Setting value: 59.94Hz(NTSC), 50Hz(PAL)
● When the frequency is switched, "Format" is set as
follows.
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
Note
● If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
Format (HDMI)
Format (SDI)
The video format is changed on this screen.
The formats of the images which can be output differ
between "HDMI" and "SDI".
● For details on how to change the format, refer to
"Changing the format" (page 47).
● For limitations that pertain when simultaneously
outputting HDMI and SDI signals, refer to page 45.
Format
HDMI
SDI
59.94Hz


 1080/25PsF


Setting value
Frequency:
59.94Hz(NTSC)
Auto
2160/29.97p
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
50Hz
1080/50p
1080/50i
1080/25p
720/50p
Frequency:
50Hz(PAL)
Auto
2160/25p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p