Troubleshooting - Audiovox D1210 Operating Instructions Manual

0
3
3
Note
Playing a Video Game
Plug the AV output from your game system into the AV IN jack
on the front of the unit. You can use the attached AV cable to
convert the 3.5mm AV jack on the unit to RCA type AV jacks,
and match the color-coded jacks to the appropriate plugs:
Yellow (VIDEO) to Yellow, white (AUDIO L) to White, and Red
(AUDIO R) to Red. Select the AV mode and adjust the volume/
picture control to individual preference.
Use Headphones
1. Wireless IR Hi-Fi headphones may be used with the system.
Simply place batteries in the wireless headphones and
power them up. Make sure there is a clear line of site to the
IR Headphone Sensor.
2. Optional wired Hi-Fi headphones may be used with the
system. Simply plug in the headphone to either headphone
jack on the front of the unit. When using the right headphone
jack both internal speakers will be turned off.
Interference
Please note the following common TV reception interferences:
Ignition effect
Black spots or vertical lines may appear. Screen jumps crazily or is very unstable.
This is commonly the result of car ignition system interference, neon lights, or other
forms of electrical interferences.
Ghost Shadows
This is the result of two signals : One being the original signal from the
antenna while the 2nd signal is a slightly delayed signal, normally the result of
bouncing off tall buildings or other obstructions. This problem might be corrected by
adjusting your outdoor antenna.
Flurries
Lots of tiny dots appears on your screen. This is the result of poor reception signals.
You may have to re-enforce your antenna signals.
0
3
4

Troubleshooting