Table of Contents
Advertisement
Troubleshooting
In case of abnormalities, proceed with the following investigation before requesting
servicing.
In the following cases
Used up battery.
(Red indicator for
No picture and
Battery replacement is lit).
No sound.
Wrong installation battery
Direction.
Min. volume and brightness.
AC connector/vehicular connector
not connected correctly.
Video camera cable connected to
AV terminal.
Though there is audio
Used up battery.
signal, the picture is
(Red indicator for battery
white, dim or fully
Replacement is required).
white/fully black.
Brightness adjustment not proper.
Poor signal receiving environment. Move it to a location with good
Cause
Replace all with new batteries of
The same variety.
Install + - polarities correctly.
Adjust volume and brightness.
Connect AC connector/
Vehicular connector correctly.
Pull out the video camera cable
Connected to the AV terminal.
Replace all with new batteries of
The same variety.
Adjust it to a proper brightness.
signal receiving environment.
Solution
Advertisement
Table of Contents
