Product Specifications - Audiovox D1210 Operating Instructions Manual

0
3
7
Troubleshooting
Before calling our serviceman, please refer to the following chart to see if you can adjust
the problems yourself.
Trouble Checks and Adjustments
TV will not turn on Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Make sure batteries are placed in the remote the right way.
Unplug TV for a few minutes and then turn it on again.
Poor sound or no sound Check volume settings and mute settings
Check for possible interference sources
Blur picture or no picture Check antenna or TV cable
Check for possible outside interferences
Check picture settings
Some channels are not clear Check outdoor antenna and make necessary adjustments
Check possible outside interferences
Poor Color tone or No color Check memory settings
Check Color settings
Check if program is in correct channel
Check antenna and cable connections
Check possible outside interferences
No reception from Cable Check if cable is connected properly
Check if channels are selected properly
Check if cable company are experiencing technical problems
Channels above 13 cannot receive Check TV channel settings (CATV/TV) are set properly( page 28 )
Check antenna and UHF settings
Unable to operate remote Check for low batteries or possible obstructions between remote and TV sensor
Check TV main power source
TV shut off Electric power failure
TV programs ended
Display Specifications:
Screen
Aspect Ratio
Resolution
Viewing Angle
Contrast Ratio
Brightness
Backlight life
Connection information:
Composite (RCA input)
Composite (RCA output)
(2) Headphone (Wired)
Headphone (Wireless)
NTSC TV Tuner (181 channel CATV/AIR ready)
Mechanical Dimensions:
WxHxD (W/Speakers)
WxHxD (W/O Speakers )
Weight
Power Usage:
Power source
Power input

Product Specifications

12" (diagonal)
4:3
800x600
H: 90 degree V: 40 degree
180:1 (typ)
180 cd/m2 (typ)
10,000 hrs (minimum)
16.8" x 9.9" x 3.5"
11.8" x 9.9" x 3.5"
7.6lb
AC 110V - 240V @50/60Hz or 12V
12Vdc, 2.5A
0
3
8