Table of Contents
Advertisement
Solving Problems
Note:
❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏ Composite black looks slightly different from pure black. In addition, the print speed is reduced.
❏ To maintain the quality of the print head, black ink is also consumed.
Options
Yes
No
Disable this feature
It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or freezing temperatures.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box
will have solidified and no more ink can be absorbed.
❏ Do not remove the maintenance box except when replacing it; otherwise ink may leak.
>
It is Time to Replace the Maintenance Box
Description
Select to use a mixture of color inks to create black. This window is displayed the next time
you print a similar job.
Select to continue using the remaining black ink. This window is displayed the next time
you print a similar job.
Select to continue using the remaining black ink. This window is not displayed until you
replace the black ink cartridge and it runs low again.
>
Maintenance Box Handling Precautions
206
Advertisement
Table of Contents
