Table of Contents
Advertisement
Product Information
Software for Making Settings or Managing Devices
Application for Configuring Printer Operations (Web Config)
Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can confirm the printer status or change the network service and printer settings. To use the
Web Config, connect the printer and the computer or device to the same network.
The following browsers are supported.
Microsoft Edge, Internet Explorer 8 or later, Firefox
*
Use the latest version.
Note:
If the administrator password has not been set when accessing Web Config, the password must be set on the administrator
password setting page.
Running Web Config on a Web Browser
1. Check the printer's IP address.
Select the network icon on the printer's home screen, and then select the active connection method to confirm
the printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the product information screen of the Epson Smart Panel.
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Related Information
"Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)" on page 268
&
"Printing a Network Connection Report" on page 251
&
Running Web Config on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Config.
>
>
Software Information
*
, Chrome
Software for Making Settings or Managing Devices
*
*
, Safari
271
Advertisement
Table of Contents
