Table of Contents
Advertisement
To access the security settings on your Adapter, click the "My Connections" tab
and point to the connection for which you want to change security settings. Click
"Edit" to change settings.
WEP Setup
64-Bit WEP Encryption
1. Select "WEP" from the "Data Encryption" drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key by typing in
the hex key manually.
A hex (hexadecimal) key is a combination of numbers and letters from A–F and
0–9. For 64-bit WEP, you must enter 10 hex characters.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
[insert UCUI-Connect2aSecureNetwork-Adv.tif]
[Add AF0F4BC3D4 to the Encryption key box]
Advertisement
Table of Contents
