Introduction Thank you for purchasing the Belkin Wireless G Gaming Adapter and welcome to the world of wireless gaming. Now you can take advantage of this new high-speed wireless technology and gain the freedom to connect to your home or office network without using cables. This product acts as a wireless range extender and access point.
10 feet from the wireless router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning;...
Page 8
Introduction Avoid Obstacles and Interference Avoid placing your wireless router (or access point) near devices that may emit radio “noise,” such as microwave ovens. Dense objects that can inhibit wireless communication include: • Refrigerators • Washers and/or dryers • Metal cabinets •...
Page 9
• For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. These guidelines should allow you to cover the maximum possible area with your wireless router (or access point).
Page 10
Introduction For more information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support at: Europe: Australia: New Zealand: Singapore: 877-736-5771 310-898-1100 ext. 2263 00 800 223 55 460 1800 235 546 0800 235 546 800 616 1790...
Overview The Adapter is designed to be positioned horizontally on a desktop, or wall-mounted. All of the cables exit from the rear of the Adapter for better organization and utility. The LED indicators are easily visible on the front of the Adapter to provide you with information about network activity and status.
Page 12
Overview Back Panel Power Jack Connect the included 4.5V DC power supply or the included (optional) USB power cable to this jack. RJ45 Ethernet Jack Connect one end of the included Ethernet cable to this port and the other end to your gaming console (e.g., Xbox Auto Connect Button The “Auto Connect”...
Connecting and Configuring the Adapter Configuring the Adapter Step 1 Connect A. Connecting to a non-secured network If you are connecting to a hidden or secured network, please see section B. Connect one end of the Ethernet cable (included) into the Ethernet port on the Adapter.
Connecting and Configuring the Adapter B. Connecting to a hidden or secured network Push and hold the “Auto Connect” button found on the back of the Adapter for 10 seconds to connect to the network with the strongest wireless signal within the area. When the Adapter has connected to the router or access point, the “Searching”...
Page 16
Connecting and Configuring the Adapter Plug the power supply (included) into the Adapter, then into an AC wall outlet. Select the Adapter from the available list. Enter the SSID (Service Set Identifier) or network name of the router to which you want to connect.
Page 17
Connecting and Configuring the Adapter Connect one end of the Ethernet cable (included) into the Ethernet port on the Adapter. Then, connect the other end to your gaming console. There are two ways to power your Adapter: using the traditional power supply or the optional USB power cable.
Using the Web-Based Advanced User Interface The most convenient way to access the Adapter’s Web-Based Advanced User Interface is to connect the unit to the wireless router through the included cable. Once you finish configuring the device, you can disconnect the cable. If you wish to connect a computer directly to the Adapter to configure it, you must set your client to match the settings of the Adapter before you can access the Web-Based Advanced User Interface.
Page 19
Using the Web-Based Advanced User Interface Windows 98SE, Me, 2000, and XP ® Go to the Windows Control Panel and double-click on the “Network” icon or the “Network Connections” icon. Right-click on the “Local Area Connection” for your wireless adapter and select “Properties”.
Page 20
Using the Web-Based Advanced User Interface Logging into the Adapter Using your Internet browser, you can access the Adapter’s Web-Based Advanced User Interface. In your browser, type “192.168.2.225” (do not type in anything else such as “http://” or “www”). Then, press the “Enter”...
Using the Web-Based Advanced User Interface Understanding the Web-Based Advanced User Interface Home Page The home page is the first page you will see when you access the Advanced User Interface (UI). The home page shows you a quick view of the Adapter’s status and settings.
Page 22
Using the Web-Based Advanced User Interface Login/Logout Button This button enables you to log in and out of the Adapter with the press of one button. When you are logged in, this button will change to read “Logout”. Logging into the Adapter will take you to a separate login page where you must enter a password.
Using the Web-Based Advanced User Interface Settings > Adapter Settings The “Settings > Adapter Settings” page lets you make changes to the wireless network settings. From this page you can make changes to the wireless settings. Adapter Name You can name the Adapter by typing a name here. IP Configuration Select either to manually enter your IP address or have it automatically set from the DHCP of your network router.
Page 24
Subnet Mask There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, DO NOT make changes to the subnet mask unless you have a specific reason to do so.
Using the Web-Based Advanced User Interface Securing your Wi-Fi Network ® Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home-office, and small-office user.
Page 26
Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting either the 64-bit or 128-bit WEP encryption mode, it is critical that you generate an encryption key.
Page 27
Typically, this is the mode that will be used in a home environment. WPA (with radius server) the network key to the clients automatically. This is typically found in a business environment. (For a list of Belkin wireless products that support WPA, please visit our website at www.belkin.com/networking.) ������������...
Page 28
Using the Web-Based Advanced User Interface Using a Hexadecimal Key A hexadecimal key is a combination of numbers and letters from A–F and 0–9. 64-bit keys are five two-digit numbers. 128-bit keys are 13 two-digit numbers. For instance: AF 0F 4B C3 D4 = 64-bit key; C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key In the boxes below, create your key by writing in two characters between A–F and 0–9 in each box.
Using the Web-Based Advanced User Interface WEP Setup 64-Bit WEP Encryption Select “64-bit WEP” from the drop-down menu. Select either “Open System”, “Shared Key”, or “Auto” from the “Authentication Mode” drop-down box. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type in a passphrase in the “Passphrase”...
Page 30
Using the Web-Based Advanced User Interface 128-Bit WEP Encryption Note to Mac users: The “Passphrase” option will not operate with Apple AirPort. To configure encryption for your Mac computer, set the encryption using the manual method described in the next section. Select “128-bit WEP”...
Microsoft. This patch works only with the Windows XP operating system. You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time.
Changing System Settings Setting WPA-Personal (PSK) From the “Security Mode” drop-down menu, select “WPA-Personal (PSK)”. For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up. Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols.
Page 33
Changing System Settings Setting WPA2-Personal (AES) From the “Security Mode” drop-down menu, select “WPA2-Personal (AES)”. For “Encryption Technique”, select “AES”. This setting will have to be identical on the clients that you set up. Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols.
Changing System Settings Utilities Password The Adapter ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it in order to log into the Adapter in the future.
Changing System Settings The following message will appear. Restoring the defaults includes restarting the Adapter. It can take up to 60 seconds. It is important not to turn the power off on the Adapter during the restart. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Adapter’s defaults will be restored.
Page 36
Changing System Settings A window will open in which you can select the location where you want to save the configuration file. Select a location. You can name the file anything you want, or use the default name “Config”. Be sure to name the file so you can locate it yourself later.
Changing System Settings Restore Previous Settings This option will allow you to restore a previously saved configuration. Click “Browse”. A window will open that allows you to select the location of the configuration file. All configuration files end with a “.cfg”. Locate the configuration file you want to restore and double-click on it.
Adapter’s address (default = 192.168.2.254) into the navigation bar of your browser. Firmware Update From time to time, Belkin may release new versions of the Adapter’s firmware. Firmware updates contain feature improvements and fixes, if any. When Belkin releases new firmware, you can download it from the Belkin update website and update your Adapter’s firmware to the...
Page 39
Changing System Settings Downloading a New Version of Firmware If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen such as the following. To download the new version of firmware, click “Download”. A window will open that allows you to select the location where you want to save the firmware file.
Page 40
Changing System Settings When the save is complete, you will see the following window. Click “Close”. The download of the firmware is complete. To update the firmware, follow the next steps in “Updating the Adapter’s Firmware”.
Page 41
Changing System Settings Updating the Adapter’s Firmware In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file. All firmware files end with a “.bin”. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name.
Page 42
Changing System Settings You will be asked if you are sure you want to continue. Click “OK”. You will see one more message. This message tells you that the Adapter may not respond for as long as one minute as the firmware is loaded and the Adapter is rebooted.
If you are unable to connect to the Internet, please check the following items: Look at the lights on your router. If you’re using a Belkin Router, the lights should be as follows: • The “Power” light should be on.
Page 44
Troubleshooting Problem: I can’t connect to the Internet wirelessly, but the Adapter is connected to my network. Solution: If the name of your network is listed as the SSID to which the Adapter is connected in the home page, please follow the steps below: If the network has security (encryption) enabled, you will need to enter the network key.
Page 45
Troubleshooting Problem: My wireless network performance is inconsistent. Data transfer is sometimes slow. Signal strength is poor. Difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection. Solution: Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases.
Page 46
Troubleshooting What’s the difference between 802.11b, 802.11g, 802.11a, and 802.11n? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards.
Page 47
Troubleshooting Wireless Comparison Chart 11Mbps Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g Depends on interference— typically 100–200 ft. indoors Mature—legacy technology *Distance and connection speeds will vary depending on your networking environment. 54Mbps 54Mbps Common household...
Page 48
Troubleshooting Technical Support You can find technical support information at networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: US: 877-736-5771 or 310-898-1100 ext. 2263 Europe: 00 800 223 55 460...
Information Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation.
Page 50
Information Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.
Page 51
(except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin Corporation determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Page 52
Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.