5. Install the middle log (2) so it sits on the middle grate (e) line and the rest on the rear platform until the rear log is placed (Figure 53).
6. The rear log (3) will first be placed on the pin of the middle log (2) (Figure 53), then moved left or right until it can be positioned on the two tabs
(Figure 54).
Figure 53 - Install Middle Log (2)
Pin for Rear Log (3)
1
Bottom View
7. The front right log (4) will be positioned on the second from the right grate tine (f) and rest on the rear log (3).
8. The right log (5) will be placed on the pin in the rear log (3) and rest against the right hand side grate tine (g) (this might require the front
right log (4) be raised up slightly). See Figure 56.