Installing The Drive Cage - Dell E02B005 Installation And Service Manual

Figure 20. Removing the drive cage
Next steps
Install the drive cage.

Installing the drive cage

Prerequisites
Follow the safety guidelines listed in Safety instructions on page 45.
Steps
1. Align the slots on the sides of the drive cage with the standoffs on the system.
2. Lower the drive cage into the system until the slots on the drive cage engage with the standoffs on the system.
3. Slide the drive cage into the system to the lock position.
4. Using the Phillips #1 screwdriver, replace the screws to secure the drive cage to the system.
58 Installing and removing system components