Using Cableclear ® Digital Noise Reduction; Using Mpeg Noise Reduction; Using The Game Mode Feature - Toshiba 26AV502RY Owner's Manual

Using CableClear
®
reduction
The CableClear digital noise reduction feature
®
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1無
and open the Video menu, highlight
Press
Noise Reduction and press
2無
In the CableClear field, select your desired setting.
Note:
• If the current input is ANT/CABLE, VIDEO 1,
or VIDEO 2, the menu will display the text
"CableClear." The available selections are Off,
Low, Middle, and High.
• If the current input is ColorStream HD1,
ColorStream HD2, HDMI 1, or HDMI 2,
the menu will display the text "DNR." The
available selections are Off, Low, Middle,
and High. Low, Middle, and High will
reduce the noise in varying degrees, from
lowest to highest, respectively.
3無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.

Using MPEG noise reduction

The MPEG noise reduction feature allows you
to reduce visible interference caused by MPEG
compression. Choices for MPEG noise reduction
are Off, Low, Middle, and High. Off is automatically
selected when this feature is disabled ("grayed out").
To select the MPEG noise reduction level:
1無
and open the Video menu.
Press
2無
Highlight Noise Reduction and press
3無
p q
to highlight the MPEG Noise
Press or
Reduction field, and then press
either Off, Low, Middle or High.
4無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.
54
Chapter 7: Using the TV's advanced features
digital noise
.
.
t u
or to select

Using the Game Mode feature

You can use the Game Mode feature for shorter frame
delays when playing a video game requiring split-
second timing between the on-screen display and input
from the controller (such as music creation and high-
action games).
This feature is more effective for 480i and 1080i input
signals.
Note: To use the Game Mode feature, the
current video input must be Video 1, Video 2,
ColorStream HD1, ColorStream HD2, HDMI 1,
or HDMI 2. The Game Mode cannot be turned
on when any other video input is selected.
To turn on Game Mode:
1無
and open the Video menu.
Press
2無
p q
to highlight the Game Mode and
Press or
u
then press .
3無
p q to select On and then press
Press or
To turn off Game Mode:
Select Off in step 2 above, change the video input, or
turn the TV off and then on again.
Note: You can change the video input by pressing
on the remote control ( page 34).
.