Using The Black Stretch Feature; Using Mpeg Noise Reduction; Using Cableclear ® /Dnr (Digital Noise Reduction) - Toshiba 26HL37 Owner's Manual

267470726HL37_EN.book Page 36 Friday, July 6, 2007 7:44 PM

Using the black stretch feature

You can use the black stretch feature to correct the contrast
balance in the black areas of the picture. The effect depends on
the quality of the video signal.
To turn on the black stretch feature:
1
Press Y and open the Picture menu.
2
Highlight Picture Settings and press T.
3
Press B or b to highlight Black Stretch.
Picture Settings
Black Strech
MPEG NR
CableClear DNR
Color Temperature
MENU Back EXIT
4
Press C or c to select On.
Black Strech
To turn off the black stretch feature:
Select Off in step 4 above.

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are
is automatically selected when this feature is disabled
Off
("grayed out").
To select the MPEG noise reduction level:
1
Press Y and open the
2
Highlight Picture Settings
3
Press B or b to highlight MPEG NR.
Picture Settings
Black Strech
MPEG NR
CableClear DNR
Color Temperature
MENU Back EXIT
4
Press C or c to select Low, Middle, High, or Off.
MPEG NR
36
Chapter 6: Using the TV's features
2/2
Off
High
Auto
Medium
Exit
On
, , , and .
Off Low Middle High
Picture menu.
and press T.
2/2
On
High
Auto
Medium
Exit
Middle
®
Using CableClear /DNR (digital noise
reduction)
The CableClear ® digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To turn on the CableClear/DNR settings:
1
Press Y and open the Picture menu.
2
Highlight Picture Settings and press T.
3
Press B or b to highlight CableClear DNR.
Picture Settings
Black Strech
MPEG NR
CableClear DNR
Color Temperature
MENU EXIT
Back Exit
4
Press C or c to select Low, Middle, High, or Auto.
CableClear DNR
To turn off CableClear DNR:
Select Off in step 4 above.
Note:
®
• The CableClear DNR feature works with 480i input sources
only.
• When the TV is in ColorStream or HDMI mode, the words
"CableClear DNR" will change to "DNR" in the menu.
• DNR is not selectable in PC mode.
2/2
On
High
Auto
Medium
Low
HL37 (E/F) Web 213:276