Connecting A Dvd Player With Colorstream; (Component Video), A Vcr, And A Satellite Receiver - Toshiba 26AV502RY Owner's Manual

Connecting a DVD player with ColorStream

and a satellite receiver
Your TV has two sets of ColorStream
Y
P P
R
B
COMPONENT VIDEO S-VIDEO VIDEO
OUT
OUT
DVD player with component video
From satellite dish
Y P P
B R
COMPONENT VIDEO VIDEO
Satellite
S-VIDEO
OUT
IN
OUT
Satellite receiver with component video
You will need:
coaxial cables
•
standard A/V cables
•
− For better picture performance, if your VCR
has S-video, use an S-video cable (plus the
audio cables) instead of the standard video
cable. Do not connect both types of video
cable to VIDEO 1 at the same time or the
picture performance will be unacceptable.
− If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
standard audio cables
•
component video cables
•
− You can connect the component video cables
(plus audio cables) from the DVD player or
satellite receiver to either set of ColorStream
terminals on the TV (HD-1 or HD-2). The
ColorStream HD-1 and HD-2 terminals
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
A 1080i signal will provide the best picture
performance (1080p is not supported).
− If your DVD player or satellite receiver does
not have component video, connect a
standard A/V cable to VIDEO 2 on the side
panel. If your DVD player has HDMI video,
see page 16.
Chapter 2: Connecting your TV
(component video) inputs.
®
TV back panel
AUDIO
OUT
L
R
AUDIO
OUT
L
R
(component video), a VCR,
®
Stereo VCR
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream
HD-1 video input source on the TV.*
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the ColorStream
HD-2 video input source on the TV.*
To view the VCR or view and record
antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want
to watch. Select the VIDEO 1 video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record. Select the ColorStream HD-1 video input source
on the TV* to view the DVD.
* To select the video input source, press
INPUT on the remote control ( page 21). To
program the TV remote control to operate
other devices, see Chapter 3.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
From antenna
VIDEO AUDIO
L R
IN IN from ANT
CH 3
CH 4
OUT
OUT to TV
L R
15