Cableclear® Digital Noise Reduction - Toshiba 40E220U User Manual

Using theTV'sAdvanced F eatures 109
Using the advanced picture settings
To select the color temperature:
1 Press the MENU button to open the Picture menu.
Highlight Picture Settings, and then press tile ENTER button.
Highlight Advanced Picture Settings, and then press tile
ENTER button.
2
3
4
5
Highlight Color Temperature, and then press the ENTER
button.
In the Color Temperature field, press the (41 _ arrow)
buttons to select the mode you prefer (Cool, Medium, or
Warm).
Press the (&/y arrow) buttons to select either B Drive or G
Drive, and then press the (4/11_ arrow) buttons to adjust the
settings:
•lo B Drive: press the ( _ arrow) button to make the picture
blueish.
*lo G Drive: press the (_ arrow) button to make the picture
greenish.
NOTE
TheB Driveand G Drivesettings areconnected to theColor
Temperature settings andwill changebasedonwhichsettingis
selected in step5 above.
7 To save your new settings, highlight Done, and then press the
ENTER button.
To revert to your original settings, highlight Reset, and then
press the ENTER button.
NOTE If you selectoneofthefactoryset picture modes(Dynamic,
Standard, M ovie,or PC)andthenchange theColorTemperature
mode,thepicturemodeautomatically c hanges to Preference.
CableClear _ digital N oiseReduction
The CableClear ®digital Noise Reduction feature allows you to
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a cable
channel) or playing a noisy video cassette or disc.
To change the CableClear ®settings:
1 Press the MENU button and open the Picture menu.