Scrolling The Theaterwide Picture (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature - Toshiba 26AV502RY Owner's Manual

Picture Size
Native
(for 480i (HDMI), 480p (HDMI), 720p,
1080i, and 1080p signal programs)
If receiving a 480i (HDMI), 480p (HDMI), 720p,
•
1080i, or 1080p signal program, Native mode scales
the video to display the entire picture within the
borders of the screen (i.e. no overscanning).
This is especially useful for external HD sources
•
such as DVHS movies, or PC graphics.
Note:
• This mode is supported only for HDMI
(1080p,1080i, 720p, 480p, and 480i), ColorStream
(1080i and 720p), and ANT/ CABLE (digital)
inputs (1080p,1080i, and 720p).
• Depending on the input signals, the border of
the picture may be hidden, displayed in black,
or noisy.
Dot by Dot
(for VGA, SVGA, XGA, WXGA, and
SXGA sources only)
The "Dot by Dot" picture is non-scaling display.
Depending on the input signal formats, picture is
displayed with sidebars and/or bars at the top and
bottom. (Example: VGA input source)
* To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide
picture" .
Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2
and TheaterWide 3 modes for each input.
40
Chapter 6: Using the TV's features
®
®
picture
To set the scroll settings:
1無
and open the Video menu.
Press
2無
Highlight Theater Settings and press
3無
In the Picture Size field, select either TheaterWide
2 or TheaterWide 3 (you cannot scroll in any other
mode).
4無
q
to highlight the Picture Scroll field.
Press
5無
t u
Press or to scroll the picture up and down
as needed.
6無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press
.
Note: When receiving a signal at 480i
resolution, the picture scroll function may have
limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the
TV will automatically select the picture size when
one of the following input sources is received:
A 480i, 480p, 720p, 1080i digital signal from the
•
ANT/CABLE input
A 480i signal from the VIDEO 1 or VIDEO 2 input
•
A 480i signal from the ColorStream HD1, or HD2
•
input
A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz)
•
signal from the HDMI 1/2 input
Automatic aspect size
Aspect ratio of
(automatically selected when
signal source
Auto Aspect is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined (no The current picture size you
ID-1 data or set under "Selecting the
HDMI aspect data) picture size" on page 38.
Note: The auto aspect ratio feature is not
applicable to PC input.
.