USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
1. Remove wine rack (see WINE RACK INSTALLATION
in Maintenance).
2. Starting from the side that has the spacers
(previously unaltered units will be on the right hand
side from the factory), remove 2 screws, slide and
spacer.
3. Reinstall the slide with the original 2 screws.
4. Remove 2 screws from the other side.
5. Place the spacer in between the liner and slide.
6. Install original hardware.
7. Slide wine rack back into position.
u-line.com
Door Adjustments 3