Set Up A Device Password - HTC CLIO200 User Manual

Set up a device password

You can help keep your data more secure by requiring a password every
time SnapVUE mode is used.
To set a device password
1. Tap Settings on the Home screen and then tap Lock.
2. On the Password tab, select the Prompt if device unused for check
box, and in the box to the right, select how long your device must be
idle before a password is required.
3. In the Password type box, select the type of password you would like
to use.
4. Enter the password in both the Password and Confirm boxes.
5. Tap OK. The next time you switch to SnapVUE mode, you will be
prompted to enter your password.
Notes • If you entered a hint, the hint will be displayed after the wrong password
is entered five times.
• Each time a wrong password is entered, the device response time gets
longer until the device appears to be not responding.
• If you forget your password, tap Settings > Clear Storage to clear the
memory. Before you do this, make sure you back up your data first so that
you can restore them back.
Operating in SnapVUE™ 59