Datamax OC-3 Series User Manual page 13

8. Verify the media exits straight and is against the right-hand
edge.
Figure 22
9. Close the printer (Figure 23). The printhead cover snaps into
place when completely closed.
Figure 23
10. Press the media advance button once to advance to the next
top of form (see Figure 4: Side view on page 1).
11. At either edge of the printer cover are serrated corners. Tear
the media by pulling up and away from the printer.
Warning: The tear bar and printhead cover surface may be
hot and/or sharp. Use caution when handling the printhead
and tear bar.
S
ETTING UP YOUR PRINTER
9