Oki ES5442 Advanced Manual page 26

2
Remove the fuser unit from the machine.
For details, see "Replacing the Fuser
Possible to get burned.
Since the fuser unit gets hot, carry out the operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold it whilst it is hot. Wait until it has cooled
down and then carry out the operation.
3
Attach the envelope lever to the fuser unit.
Press the jam release lever, and then insert the envelope lever in to the nearby hole.
Push the lever to lock.
4
Replace the fuser unit to the machine.
For details, see "Replacing the Fuser
Unit".
Unit".
Loading Envelopes
When printing on envelopes, change the paper size setting, and use the MP tray and rear
output tray.
1
Load envelopes until their edges touch the paper feed entrance with the print
side up.
Com-9, Com-10, DL, C5, Monarch
2
Open the rear output tray.
3
Press [Device Settings] on the touch panel.
4
Press [Paper Setup].
5
Press [MP Tray].
6
Press [Paper Size].
7
Press the size of envelopes you use.
8
Press [Back] until the home screen is displayed.
Available envelope types.
About Paper Types That Can be Loaded (User's Manual)
For Windows PCL Printer Driver
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the envelope size from [Size] on the [Setup] tab.
- 26 -
2. Print