Hoshizaki DCM-500B H Instruction Manual page 22

10) Confirm bin control operation: Remove the control box cover and ice storage bin cover,
move the control switch to the "ICE" position, then engage the safety switch on the front
frame. See Fig. 7. After the "GM" LED on the control board turns on (5 sec.), the 5-min.
ice purge timer starts. Bypass the 5-min. ice purge timer by pressing the "SERVICE"
button on the control board. See Fig. 8. WARNING! Risk of electric shock. Care
should be taken not to touch live terminals. Otherwise, wait for the 5-min. ice purge
timer to terminate and the compressor to start. Next, press and hold the actuator paddle
located inside the ice storage bin. WARNING! Keep hands, hair, and loose clothing
clear of the agitator(s) inside the ice storage bin. 6 to 10 sec. later, the 90-sec.
compressor shutdown timer starts. Once the 90-sec. compressor shutdown timer
terminates, the compressor de-energizes and the 60-sec. gear motor shutdown timer
starts. Once the 60-sec. gear motor timer terminates, the gear motor de-energizes.
11) Release the actuator paddle and disengage the safety switch. Move the control switch
to the "OFF" position, then move the power switch to the "OFF" position. Turn off the
power supply. Replace the control box cover and ice storage bin cover in their correct
positions.
12) Clean the ice storage bin liner, cover, and components using a neutral cleaner. Rinse
thoroughly after cleaning. WARNING! CHOKING HAZARD: Ensure all components,
fasteners, and thumbscrews are securely in place. Make sure that none have
fallen into the ice storage bin. Replace the ice storage bin cover in its correct position.
13) Move the power switch to the "ON" position, then replace the front panel in its correct
position. Turn on the power supply, then move the control switch to the "ICE" position to
start the automatic icemaking process.
"COMP" LED
Fig. 8
"GM" LED
"SERVICE" Button Ice Dispense Time Control
2A9093-01
22