To add, delete, or rename parameters
Parameters are set when they are inserted into MAIN or INIT
sequences. The changes you make in the parameter list will appear
every place in the INIT or MAIN sequences in which you have used that
macro.
1 From the User Macros menu, select a macro from the list of
macros.
2 Highlight the first line of the macro, then select the field.
3 To add a parameter, select Add Parameter, then select the new
parameter field that appears and rename the parameter.
4 To delete a parameter from the parameter list, select a parameter
name, then select Delete Parameter.
Using the Pattern Generator
Building Test Vectors and Macros
165