Table of Contents
Advertisement
Getting Started
Edit, Delete, or Copy a Protocol
Edit a Protocol
In the
1.
Tap the protocol that you want to modify, then tap Edit.
2.
Make any desired changes, then tap Save.
3.
Delete a Protocol
From the
1.
Tap the protocol you want to delete, then tap Delete.
2.
Copy a Protocol
In the
1.
Tap the protocol you want to copy, then tap Copy.
2.
Enter a name for the new protocol, then tap Save.
3.
Make any desired changes, then tap Save.
4.
View or Output Results Stored on the Reader
In the
Main
1.
Kinetic/Spectral protocols are listed by read mode/file name. Tap the protocol
for which you want to view or output results. The results are displayed on the
touchscreen.
• Tap the data set name at the top of the screen to view protocol details,
including the start date/time, final status, and protocol parameters.
• Endpoint: Tap the screen to toggle through the available data sets.
• Kinetic/Spectral: Tap a well to view its kinetic curve or spectral scan.
• If a well displays "OVR," the measurement exceeds (overflow) the maximum
absorbance measurement range: 4.000
3.000
• If a well displays "???," a result (for example, blank subtraction) could not be
calculated.
Tap the green button in the upper-right corner of the display. The results are
2.
printed and/or saved to the USB flash drive, depending on the read mode and
defined output
Agilent BioTek Epoch 2 Instructions for Use
1771011I Revision C
Main
Menu, tap Protocol.
Main
Menu, tap Protocol.
Menu, tap Protocol.
Main
Menu, tap Results. Results for the last 10
OD
(sweep read speed).
format.
Endpoint/Take3
OD
(normal read speed, or cuvette);
Agilent Technologies, Inc.
Page 34 of 51
and last 2
Advertisement
Table of Contents
