Magnadyne M9900DVDS-QR Quick Reference Manual

Quick Reference
Start-up Guide
Basic Operation
Turning the Unit On and Off :
Selecting Play Source:
Radio, Sirius Satellite Radio (if equipped), DVD/CD, External CD Changer (if
equipped) or Auxiliary Sources (if equipped).
Dimming the Display:
of the display. Push and hold again to return to normal illumination.
Sound Settings
Volume:
Rotate the
Bass, Treble, Balance or Fader:
between the different sound controls. Once the desired function is in
the display area rotate the knob left or right to achieve the desired level.
Equalizer:
Push the
settings: Classic, Rock, DSP Off (digital sound processor off),
Flat, Pop and Jazz, as indicated in the display area.
Note: When selecting EQ mode wait a few seconds for the radio to adjust.
Mute:
Push the MUTE
return to previous volume level.
Loudness:
Push the
volume levels.
Sirius Satellite Radio
Note:
If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius Tuner
ID Number (ESN):
1.
Push the MODE button until "SIRIUS" appears in the display area.
2.
Push the TUNE button until "DIRECT" appears in the display area. Wait
a few seconds and "CH 000" will then appear in the display.
3.
Push the button and the first 4 digits of the 12 digit Sirius Tuner
BAND
ID Number (ESN) will be displayed.
4.
Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner
ID Number (ESN) will be displayed.
5.
Push the button to exit.
TUNE
Selecting Sirius:
Please be patient as it may take a minute to receive a satellite signal.
Manual Tuning
1.
Push the TUNE
2.
Rotate the
Category Tuning
1.
Push the TUNE
2.
Push button
3.
Rotate the
Direct Tuning
1.
Push the
TUNE
2.
Rotate the
3.
Push the
TUNE
4.
Rotate the
5.
Push the
TUNE
6.
Rotate the
will start playing the station you have selected when the third digit
stops flashing.
(Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.)
Push the
Push the MODE
Push and hold the
VOLUME knob left or right.
Push the
button to choose between preset equalizer
EQ
button to mute the volume level. Press again to
button to boost high and low tones at low
LOUD
Push the MODE button until "SIRIUS" appears in the display.
button until "NORMAL" appears in the display.
TUNE knob to select a station from 01-182.
button until "CATEGORY" appears in the display.
or to find the desired category.
1 2
TUNE knob and select a station.
knob until "DIRECT" appears in the display.
TUNE knob and select the first digit (0 or 1).
knob again.
TUNE knob and select the second digit (1-8).
knob again.
TUNE knob and select the third digit (1-9). The tuner
button.
POWER
button to choose a play source:
LOUD button to dim the backlight
VOLUME knob to scan
(if Equipped)
POWER
MODE AS/PS
DIM / II
LOUD MUTE
VOLUME
PUSH SEL/
MENU
EQ
DISP
LOUD MUTE
MUTE
LOUD
MODE AS/PS
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
BAND W- BND
EQ DISP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
MODE AS/PS
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
DISC/CAT
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD
TUNE/TRACK/CH
PUSH
SCAN/S-MOD