Siemens KG56FPI40 Instructions For Use Manual page 27

Fault
Displays do not illuminate.
It is too cold in the cooling
compartment or the
hyperFresh compartment.
The temperature in
the freezer compartment is
too warm.
Appliance is not cooling,
temperature display and light
are lit.
The side panels of the
appliance are warm.
Possible cause
Power failure; the fuse has
been switched off; the mains
plug has not been inserted
properly.
Appliance opened
frequently.
The ventilation openings
have been covered.
Large quantities of fresh
food are being frozen.
Showroom mode is switched
on.
Pipes run into the side panels
which heat during the
cooling process.
Remedial action
Connect mains plug. Check whether the power
is on, check the fuses.
Increase the temperature in the cooling
compartment.
Increase the temperature in the hyperFresh
compartment.
Do not open the appliance unnecessarily.
Remove obstacles.
Do not exceed max. freezing capacity.
Press and hold the °C button and the setting
button @ for 5 seconds until a confirmation
tone sounds.
After a short time, check whether your
appliance is cooling.
That is normal behaviour for the appliance and
not a fault.
en
27