Siemens KG56FPI40 Instructions For Use Manual page 14

en
Note
Inserting and removing the plug on the
rear side of the appliance is more difficult
than expected. Ensure that the plug is
completely plugged in.
Attach the Home Connect Wi-Fi dongle
at a height of 1 metre.
Notes
Please observe the safety instructions
■
and warnings in these instructions for
use and ensure that these are also
adhered to when you are operating
the appliance using the Home
Connect app and are not at home
(see the section on safety instructions
and warnings).
Follow the instructions in the Home
Connect app as well.
The operation on the appliance always
■
has priority over operation via the
Home Connect app. During this time,
it is not possible to operate the
appliance using the app.
Setting up Home Connect
Notes
In order to perform settings via Home
■
Connect, the Home Connect app must
be installed on your mobile device.
Please observe the documents of
Home Connect supplied with the
appliance. Follow the steps specified
by the app to implement the settings.
If the appliance is not operated for a
■
long time, the Home Connect menu
closes automatically. Notes on
opening the Home Connect menu can
be found at the beginning of the
relevant section.
14
Automatic connection with the home
network (WLAN)
If a WLAN router with WPS function is
available, you can automatically connect
the refrigerator to the home network.
1. Press the super button and the
lock button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.
2. Press the °C button repeatedly until
the displays AC and oF are shown.
3. Press the + button.
The appliance is ready for automatic
connection.
The display shows an animation for
2 minutes.
Follow the steps below during this
period.
4. Activate the WPS function on the
home network router (e.g. using the
WPS/WLAN button; information on this
topic can be found in the router
documentation).
If the connection is successful, on
■
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
If the display shows oF, it was not
■
possible to establish a connection.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process or establish the
connection manually.