Siemens KG56FPI40 Instructions For Use Manual page 16

en
3. Press the + button to connect the
appliance with the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. The refrigerator is displayed in the
Home Connect app on the mobile
device. To add, select the refrigerator
and add with the + button.
If the refrigerator is not automatically
displayed, in the Home Connect app
first select Search for domestic
appliances and then Connect
domestic appliance.
5. Follow the instructions in the app until
the process is complete.
The display shows PA and on.
■
The refrigerator has been
successfully connected to the app.
If the connection has failed, please
■
check whether the mobile device is
connected to the home network
(WLAN).
Finally connect the refrigerator
again to the app.
When the display shows Er, reset
■
the Home Connect settings and
perform set-up again from the
beginning.
16
Verify signal strength
You should verify the signal strength if no
connection can be established.
1. Press the super button and the
lock button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time. Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.
2. Press the °C button repeatedly until
the display shows SI. In the second
display, a value appears between
0 (no reception and 3 (full reception).
Note
The signal strength should be at least
2. If the signal strength is too low, the
connection could be interrupted. Place
the router and the refrigerator closer
together, ensure that the connection is
not disturbed by shielding walls or
install a repeater to strengthen the
signal.