Enabling The Firewall With Default Policy - ZyXEL Communications ZyXEL Prestige 662HW Compact Manual

6.7 Enabling the Firewall with Default Policy

From the main screen, click Firewall and then Default Policy to display the following
screen. Activate the firewall by selecting the Firewall Enabled check box as seen in the
following screen.
The following table describes the labels in this screen.
LABEL
Firewall Select this check box to activate the firewall. The Prestige performs
Enabled access control and protects against Denial of Service (DoS) attacks
when the firewall is activated.
Allow Select this check box to have the Prestige firewall permit the use of
Asymmetrical triangle route topology on the network. See the appendix for more on
Route triangle route topology.
Prestige 662HW Series Compact Guide
Figure 19 Default Policy
Table 6 Firewall: Default Policy
DESCRIPTION
30