Internet Access With Zero Configration - ZyXEL Communications ZyXEL Prestige 662HW Compact Manual

LED COLOR
CON/AUX Green
Orange
3 Internet Access With Zero
Configration
With the Prestige's Zero Configuration, you can access the Internet easily. Simply
connect a computer to the Prestige and access the Internet without changing the network
settings (such as the IP address and subnet mask) of the computer.
Step 1.
Make the hardware connections and turn on the Prestige (refer to the Rear
Panel Connections section).
Step 2.
Wait until the DSL/ACT LED turns steady on. Launch your web browser
and navigate to a web site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet connection. This may
take about two minutes.
Step 3.
If you have a PPPoE or PPPoA connection type, a screen displays
prompting you to enter your Internet account username and/or password.
Enter the username, password and/or service name exactly as provided by
your ISP. Click Apply.
Prestige 662HW Series Compact Guide
Table 2 Front Panel LED Description
STATUS
On The CON/AUX switch is set to CON, the CON/AUX
port is connected to a management computer and
someone is logged into the Prestige.
On The CON/AUX switch is set to AUX and the
CON/AUX port has an Internet connection through
a dial-up modem.
Blinking The CON/AUX switch is set to AUX and the
CON/AUX port is sending or receiving data through
a dial-up modem or ISDN TA.
Off The CON/AUX link is not ready, or has failed.
DESCRIPTION
7