Speed; Bearing; Key Beep - Furuno 9ZWFM4850 Operator's Manual

FM-4850 Operator's Manual
Press the Menu/DSC control to save the setting and return to the
Step 4
previous page.
10.2.3

Speed

This feature allows you to set the unit of measurement for sailing speed.
Note
A GNSS receiver should be connected to the radio or the "INTERNAL GNSS"
should be set to "ON" to show the sailing speed.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "GENERAL SETUP > UNITS > SPEED".
Step 2
Select a unit.
Step 3
Press the Menu/DSC control to save the setting and return to the
Step 4
previous page.
10.2.4

Bearing

This feature allows you to set the mode (magnetic or true).
Note
A GNSS receiver should be connected to the radio or the "INTERNAL GNSS"
should be set to "ON" to show the bearing.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "GENERAL SETUP > UNITS > BEARING".
Step 2
Select "TRUE" or "MAGNETIC".
Step 3
Press the Menu/DSC control to save the setting and return to the
Step 4
previous page.

10.3 Key Beep

This feature allows you to set the volume level of the beep that is emitted when a
key is pressed. The keep beep volume of each handset is adjusted separately.
55
GENERAL SETUP