Furuno 9ZWFM4850 Operator's Manual page 18

FM-4850 Operator's Manual
No.
Display location information including longitude, latitude, time,
COG,
and SOG.
If there is no any information, it displays "NO GNSS DATA".
Note
There are three sensors including built-in sensor, NMEA2000 and
NMEA0183. The last two are external sensors. Their priorities in
descending order are described as follows:
10
1. Built-in sensor: The GNSS data from this sensor enjoys the
highest priority.
2. NMEA2000: If no valid GNSS data is from the built-in sensor
or this sensor is disabled, the GNSS data from NMEA2000 will
be used.
3. NMEA0183: If no valid GNSS data from both the build-in
sensor and NMEA2000, the GNSS data from NMEA2000 will
be used.
In non scan mode: display CH NAME.
In scan mode:
SCAN ALL: indicates that the user selects SCAN ALL
11 SCAN ALL+16: indicates that the user selects SCAN ALL+16
MEMORY SCAN: indicates that the user selects MEMORY SCAN
MEMORY SCAN +16: indicates that the user selects MEMORY
SCAN+16
Displays the current channel number.
12 &
Note
13
The first two digits in No.12. The last two digits in No. 13.
- ：Indicates that the current channel is simplex.
14
- ：Indicates that the current channel is duplex.
- : This icon appears if CH GROUP is INT.
- : This icon appears if CH GROUP is USA
15
- : This icon appears if CH GROUP is CAN
- : This icon appears if CH GROUP is USA or CAN, and
WEATHER MODE is ON.
Description
9
HOME SCREEN