3
-
For information on the default administrator password, refer to User's Guide CD/DVD.
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
File Path
User ID
Password
Checking computer information
Check the host address and user ID, and write them down.
1
Display the Properties window of the computer.
% In Windows 8.1/10, while pressing the [Windows] (
properties] in the displayed menu.
% In Windows 7, from the Start menu, select [Computer] - [System properties].
2
Check the computer name, and write it down in the Host address column of the checklist.
3
Open the command prompt.
% In Windows 8.1/10, while pressing the [Windows] (
mand Prompt] in the displayed menu.
% In Windows 7, from the Start menu, select [All Programs] - [Accessories] - [Command Prompt].
4
Check the user name, and write it down in the User ID column of the checklist.
3-16
Entry column
Host name or IP address to which the scanned data is sent
Name of the dedicated folder to receive the scanned data
User name required to log in to the computer
Password required to log in to the computer
•
You should not enter this column for security reasons.
Scan-to-Send function
) key, press the [X] key, and then select [System
) key, press the [X] key, and then select [Com-
bizhub C658/C558/C458/C368/C308/C258
3.2
Detail
page 3-16
page 3-17
page 3-16
Contact your sys-
tem administra-
tor.